How a returnable-bottle crate packer works
For the bottle branch of a return loop, use the returnable glass bottle washer guide to qualify cleaning, final rinse and inspection before filling.
Choose a same-end crate packer when bringing empty-crate entry and filled-crate discharge to one side shortens the installed conveyor route or frees up access. Choose straight-through when the empty-crate feed and palletizer are naturally on opposite sides. Compare both using the guarded layout and sustained output of correctly filled crates.
A beverage crate packer groups filled bottles to match the crate pattern, lifts them with format-specific tooling and lowers them into a positioned crate. In a returnables line, bottles and crates typically travel on separate paths after unpacking. The crate supply must meet the filled-bottle stream at the packer, and the filled crates must clear to palletizing. KHS describes high- and low-wall crate applications, and Sidel documents a separate crate-washing stage.
Krones’ 5 November 2026 announcement describes a Varioline 1M variant that reverses crate flow inside the machine. Its empty-crate infeed and filled-crate discharge run parallel on the same side. Krones reports that the variant can match its straight-through machine’s speed. Treat that as a supplier claim for the described design and request a commitment for your actual format and line conditions.
Compare both layouts on the same floor plan
| Layout | When it fits | What can erase the advantage |
|---|---|---|
| Straight-through | Empty crates arrive on one side and finished crates continue toward the palletizer on the opposite side. | External conveyor bends, a building column or a crossing can add travel and reduce the space available for accumulation. |
| Same-end | Both crate connections belong on the same side, or one end must stay clear for service access. | Parallel conveyors can crowd the shared approach. A short frame can still require a long queue, crossing or maintenance detour outside the machine. |
Ask both bidders to mark conveyor elevations, usable accumulation, door swings, tooling withdrawal and the installation route. Include the approach to the palletizing cell. Agree where the supplier’s scope ends, who owns the handshake signals and how a blocked discharge or missing crate propagates upstream. Use the line integration guide to define recovery responsibilities.
Size the crate flow for every format
When the crate conveyor already carries a queue at the start of a stop, use the free-position and recovery calculations to check how much of the nominal buffer is available.
For an illustrative 36,000 bottles per hour, a 24-bottle crate requires 1,500 crates per hour, or 25 per minute. A 12-bottle format at the same bottle rate requires 3,000 crates per hour, or 50 per minute. That changes the duty on the empty-crate feed and filled-crate discharge even though the filler rate is identical.
Check both directions of interruption. Empty-crate accumulation buys time when the crate feed stops. Filled-crate accumulation buys time when the palletizer stops. At 50 crates per minute, 20 usable filled-crate positions provide 24 seconds of ideal capacity if the queue starts empty and the discharge is fully blocked. Confirm usable positions and restart behavior on the installed conveyors.
Write the acceptance test before comparing quotes
At discharge, specify full case inspection for missing bottles and faulty crates, including how an incomplete crate is tracked and removed before palletizing.
- Qualify actual returned crates. Supply new crates and worn examples within your agreed serviceable limits. Check pocket clearance, divider condition, handle undercuts, bottle seating and orientation. Agree how to route crates outside the approved envelope.
- Run the governing formats. Include the SKU with the highest crate rate and the hardest bottle-and-crate combination to load. Record elapsed time, released crates, incomplete fills, breakage, interventions and stops. Agree the test duration and thresholds in advance.
- Stage loss of supply and discharge. With the approved test procedure, interrupt the empty-crate feed and simulate a downstream backup. Log the buffer state, controlled stop and restart. Check the disposition of partly filled crates and product between stations before resuming normal release.
- Time the first accepted crate after changeover. Start at the last accepted crate of the outgoing format. Include tooling, recipe selection, crate routing and the release check for the incoming format. Repeat with the operators expected to run the installed line.
Compare installed quotes for guarding, conveyor integration, crate rejection, tooling, commissioning, spare parts and retrofit downtime. Comparable prices were not independently verified. Use the automation ROI guide to value actual floor space recovered and additional usable capacity on the same operating schedule.
Key takeaways
- Compare both layouts with conveyors, guarding and access drawn in.
- Calculate crate demand separately for every bottle count.
- Count accepted crates and verify recovery after interruptions.
Frequently asked questions
What is a same-end beverage crate packer?
Empty crates enter and filled crates leave on the same side of the machine, often on parallel conveyors. Compare the space required for both conveyors, accumulation and access on the actual site drawing.
Can a crate packer also unpack returned bottles?
Some machine families offer packing and unpacking configurations. Specify whether you need to load finished bottles, remove empties or sort mixed returns, and verify that the quoted configuration supports the required duty.
How do you calculate crates per hour?
Divide the bottle rate by the number of bottles per crate to find the theoretical crate demand for that format. For acceptance, count complete crates that meet the release criteria and divide by elapsed test hours.
Sources & editorial method
Source-checked 8 November 2026. Uses the linked manufacturer announcements and public technical documentation. The supplier examples describe available configurations. The trial design is PackLine IQ editorial analysis.



